jacky@trioflor.net

+86 400 060 0060

Trioflor Group Co., Ltd.

Home / flooring tags / spc flooring problems

The SPC luxury vinyl plank flooring has been fully recognized by the market, and is widely used in offices, hotels, restaurants, teaching and home improvement places. If you choose luxury ethylene tiles (LVT) or wooden boards, SPC is an affordable and beautiful floor material.


Unlike traditional ethylene substrates, spc composite flooring is more durable and have realistic surface texture, which can imitate its natural corresponding objects very well. Although popular spc flooring is more expensive than ethylene substrates, it is more affordable than solid and engineering hardwood, but it is also beautiful. However, each product has its own advantages and disadvantages, and SPC is no exception. Realizing that these problems will help you avoid these problems and make you the maximum effectiveness from the product.


Disadvantages of SPC flooring


Difficulty underlying floor preparation

Before installation, the bottom floor should be flat, smooth, dust -free and dirt. This process requires some time and energy to get perfect results.


If the conditions of the bottom floor are not prepared, any particle trapped below will cause blocks and protrusions on the SPC surface. Over time, this will lead to severe flooring problems and may even cause tears and tearing of SPC components.


Sensitive to water

Not all stone plastic flooring is sensitive to water. However, low-grade SPC flooring will swell or change color for a long time. The moisture under the wood spc flooring will promote the growth of mold and produce odor. However, some types of SPC floors are suitable for installation in high humidity areas such as bathrooms. Before you buy any purchase, you only need to verify its functions with your SPC flooring supplier.


Unable to repair 

Although the spc wood planks are usually known for its high durability, some inferior SPC flooring is more likely to wear or tear. Once damaged, it is difficult to repair, and the worse thing is that it cannot be repaired. The only choice is to replace the specific component.


It is difficult to delete after installation

If you plan to remove the installed SPC floor, it takes time and patience. Depending on the type of SPC floor, removing the type of adhesive will definitely make you a mess.

 

No additional resale value

Unlike hardwood flooring, if you intend to resold your property, SPC flooring will not provide any additional value.


Installation


1). The flatness of the old ground (tiles, water mills, wooden floor, etc.) must meet the requirements. The uneven ground paving can cause the SPC CLICK ethylene base floor to have fluctuations, stumbling, warp and board damage. The thinner the thickness of the floor, the larger the version, the higher the requirements for the flatness of the ground. Before paving, you can measure the height difference with 3 meters. If you are sure you need to find a flat, you should choose the plan according to the on-site situation:

A. Founding — The cement base can be used for flatness (about 3-5mm thick). The cost is high, the intensity is good, and the water is not afraid of water.

B. Finding the thick layer -can be used to find flat (more than 1 cm), which is economical, moderate strength, and is afraid of water (wetland is not recommended).


2. When installing a hard LVT ethylene base plate below 8mm, you can install a moisture -proof membrane (or shock reduction pad) with a thickness of 2mm, but the thick foam floor pads are prohibited. Because the thin SPC floor will pass the surface load pressure downward, the ground pad quality is soft, and the feet of concentrated point loads, tables and chairs and cabinets cannot be compressed and deformable after being suppressed, which causes the SPC floor to deform, break, deduction, deduction, deduction, deduction, and deduction. And other issues.


3. Construction must be carried out by experienced construction staff. When installing the SPC rigid core flooring, according to the thickness, material, area, etc. of the floor, the tightness of the buckle at the floor, the direction of the paving, the side of the edge, the seam treatment, etc., determine the appropriate reserved telescopic joint size, all of which are all, all of which are all reserved. Need rich experience. Go to complete.


Reasons for SPC flooring quality problems


1. Empty and falling.

(1) Due to the low temperature in winter, the floor is frozen, and the polyethylene floor cannot be combined with the ground after thawing in spring, and it is easy to fall off. Therefore, the prescribed temperature should be kept when laying polyethylene flooring.


(2) The grass -roots concrete is not completely dry. With the volatilization of water vapor, the combination of floor glue and surface layer is affected, and the surface layer is easy to fall off.


(3) When applying the bottom paint of the floor, the grassroots are not cleaned or painted unevenly, resulting in the inadequate combination of the base layer and the surface layer, resulting in empty drums or falling off.


2. Because the welder stays at a certain point during the welding process, the polyethylene floor is burned and affects the beauty of the floor.


3. When welding the electrode, the temperature of the welding machine does not meet the requirements, and the electrode is in poor contact with polyethylene flooring, resulting in the electrode falling off later.


looking for high quality spc flooring for sale from reliable manufacturer?


12-2.png


Read More
Read Less

FAQ

How long can the SPC flooring be used?

Durable for a long time, if the maintenance is proper, the SPC floor can actually use it for 20 years


Is the SPC flooring suitable for home use?

If durability, life and easy installation are important to you, rigid spc flooring is a good choice. This luxurious ethylene base can reproduce the appearance of natural materials without extra cost and maintenance.


Will the SPC flooring be warped?

Unlike ethylene groups, wood veneer spc flooring will not deform or swell when moisture, which is an ideal choice for the business environment and family. SPC flooring is easy to clean. It is completely waterproof and does not need to be maintained. If you want it to look good, you can wipe it with a wet cloth.


Will the SPC floor be scratched?

The SPC rigid core flooring can make extremely hard core materials by combining lime and other stabilizers. It is scratch-resistant, waterproof, durable, and high, and can cope with general wear.


Read More
Read Less

Contact us

Related Information