In the decoration industry, more and more new materials are gradually entering the market, including WPC (wood plastic) flooring, an interior decoration material. As a flooring manufacturer, I will share with you how to maintain WPC flooring to extend its service life?
WPC Flooring
1. Before laying the floor, divide and analyze the quality and color depth of the template. Lay the floor with the same color and good quality as far as possible to the center of the house.
2. Before laying WPC flooring, pay attention to the ground inspection. If there is any problem, it should be repaired before laying. Although the wood-plastic board has excellent waterproof and mildew resistance, it still needs to be maintained in daily life. Do not let a large amount of water directly touch the floor.
Third, the laying direction of WPC flooring. Generally, it is laid horizontally from the entrance of the room to the inside of the house, or you can choose to lay it from one wall to the other, which is more convenient for laying.
Fourth, in order to make the floor more beautiful, a central axis can be specified before laying the wood-plastic board, which is used as the baseline of the floor, and then the concrete implementation can be carried out.
5. When laying WPC flooring, pay attention to the four adjacent edges and corners of each board to keep parallel and vertical, and try to ensure that there is no error.
6. Pay attention to the stability, regularity and firmness of WPC flooring when laying the floor. And don't forget to use adhesive on flat or grooved floors.
WPC flooring is made of high-quality wood-plastic panels. WPC flooring will have a wear-resistant layer. If the wear-resistant layer is worn, it will affect the moisture resistance and brightness of the entire floor. Therefore, the maintenance of WPC flooring must be done well.
1. The first thing you need to pay attention to is that when walking on the floor, try to wear cloth slippers, barefoot is best.
2. Secondly, it is best to put soft bottom protective pads on the feet of the furniture placed at home to avoid scratching the wear-resistant layer of the floor.
3. In addition, when cleaning, you must be careful not to let sandpaper, sanders or hard metal tools clean the WPC flooring.
Under normal circumstances, the dust and dirt can be cleaned with clean water.
For some special stains, such as paint, ink, etc., you can directly use special scouring oil to clean and wipe.
1. Use soap, hot water and a hard brush to remove dirt and residue. After the plastic wood floor is installed, clean up dirt and debris in this way.
2. Gently wipe the mark printed on the side of the plastic wood floor with alcohol or acetone.
3. Use conventional floor cleaners or cleaners containing bleach and detergent.
4. If the floor is stained with grease, immediately use a household degreaser to remove it, and then rinse it with hot water.
5. Use hot soapy water to remove ink stains, and then wash thoroughly.
6. Use common rust cleaners to remove pigmentation pollution caused by floor weathering.
7. According to the instructions on the bleach package, mix the bleach into hot water to clean wine stains and fruit stains. Wipe the stains gently and rinse with hot water.
Trioflor has the WPC flooring of high quality, welcome to consult!
